Rotor: composed of magnet, fan blade and shaft; Stator: composed of silicon steel sheet, coil and bearing; Control circuit: composed of IC induction magnet N. S. The pole controls its coil conduction through the circuit to generate internal excitation to rotate the rotor. Type: Axial fan, DC fan.
Choice: Overall cooling requirement Q=Cp m A T = D Cp CFM △ T
basic structure
It is mainly composed of four parts
Rotor: consists of magnets, blades and shafts;
Stator: composed of silicon steel sheet, spool and bearing;
Control circuit: magnets are induced by IC;
The S. pole controls its coil conduction through the circuit to generate internal excitation to rotate the rotor.
working principle
The main components of the electric fan are: AC motor. Its working principle is: the energized coil rotates under force in the magnetic field. The form of energy conversion is: electrical energy is mainly converted into mechanical energy, and at the same time, due to the resistance of the coil, it is inevitable that a part of the electrical energy must be converted into heat energy.
When the electric fan is working (assuming there is no heat transfer between the room and the outside world), the temperature in the room does not drop, but rises. Let us analyze the reasons for the temperature rise: when the electric fan is working, since there is current passing through the coil of the electric fan, the wire has resistance, so it will inevitably generate heat and release heat to the outside, so the temperature will rise. But why do people feel cool? Because there is a lot of sweat on the surface of the human body, when the electric fan works, the air in the room will flow, so it can promote the rapid evaporation of sweat, combined with "evaporation needs to absorb a lot of heat", so people will feel cool.
Way of working
1. Parallel fans: The air pressure of the parallel double fans remains unchanged, but the air volume will increase. If the air volume increases, the heat dissipation effect increases. If the heat dissipation power is too small in the design, you can consider adding a fan to solve it.
2. Series fans: The result of series fans is that the air pressure increases, but the air volume remains unchanged. This method cannot solve the problem of heat dissipation, and is generally used when the resistance of the near wind is too large to ensure the air volume.
