Principle Of Semiconductor Refrigeration

Sep 21, 2022 Leave a message

If the power supply is reversely connected, the temperature at the contact will change in reverse. This phenomenon is called Peltier effect, also known as thermal electric effect. The thermoelectric effect of pure metals is very small. If the metal is replaced by an N-type semiconductor and a P-type semiconductor, the effect will be much greater. After the power supply is turned on, electron hole pairs are generated near the upper contact, which reduce the internal energy and temperature, and absorb heat to the outside, called the cold end. The other end, due to the recombination of electron hole pairs, increases the internal energy, raises the temperature, and releases heat to the environment, which is called the hot end. The temperature difference and cooling capacity generated by a pair of semiconductor thermoelectric elements are very small. A practical semiconductor cooler is composed of many pairs of thermoelectric elements in parallel and in series, also known as a thermopile. Single stage thermopile can obtain a temperature difference of about 60 ℃, that is, the cold end temperature can reach - 10~- 20 ℃. The temperature difference at both ends can be increased by increasing the number of thermopile stages. However, the number of stages should not be too many, generally 2-3.