How To Use Aroma Diffuser

Aug 30, 2022 Leave a message

1. The water adding process of the aroma diffuser shall be powered off, and there shall be no water source and open fire around to avoid pollution or fire caused by volatilization of essential oil.

2 lift the upper cover of the aroma diffuser vertically, and check whether the upper cover is intact and clean.

3. Due to different water quality, before each use, observe whether there is severe scale on the bottom of the aroma diffuser. If there is, wipe it with an alcohol wet towel to avoid blocking the mist generator.

4 add water after cleaning. Pay attention to the warning of adding water and do not exceed the upper limit of water level.

5 before adding water, the aroma diffuser shall be placed flat without dumping or skewing, and shall be kept away from electronic equipment.

6 prepare essential oil and enough water.

7 add water slowly when adding water, and be careful not to spill water outside, especially on the outer wall of the aroma diffuser.

8 after reaching the water level, add 3-5 drops of essential oil to the water without stirring. The two will be mixed when atomized by thearoma diffuser.

9 after the essential oil is added, cover the upper cover and place thearoma diffuser in the flat area of the table.

Press the gas mist button at 10 o'clock, and steam will be ejected in a few seconds.


Aroma diffuser

image011