1. Calculation method
For multi component complex system, AQL can be calculated by considering the relationship between parts, components and the whole machine. If a system or assembly consists of several identical parts or different parts with the same AQL. Then the AQL value of the part (recorded as AQLx) should be appropriately less than the AQL value of the whole piece (recorded as AQLX). Assume that the whole machine is composed of n identical parts in series, that is, the failure of one part will lead to the failure of the whole machine. At this time, AQLx and AQLX have the following relationship:
(AQLX /100)=1(1-(AQLx /100))n
2. Estimation method
In the factory or enterprise, in order to promote the improvement of product quality, the estimated process average or a value slightly less than it can be used as the AQL value.
3. Reverse inference method
Instead of specifying the AQL value directly, the reverse inference method finds a normal inspection sampling scheme to make its OC curve pass through an important point with low receiving probability, such as the indistinguishable point (the control point of the OC curve) and the user's risk point, and reversely deduces the required AQL value.
4. Model method
A cost model is established, and the AQL value is selected to minimize the total cost of the corresponding sampling plan.
