About Mold Repair And Mold Test

After problems are found, repair the mold to eliminate errors. There are many types of plastic parts with undesirable phenomena, and the causes are complex, including mold and process conditions. The two are often combined. Before mold repair, detailed analysis and research shall be carried out according to the actual situation of the defective plastic parts, and remedial measures shall be proposed after finding out the causes of the defects of the plastic parts. Because the forming conditions are easy to change, the general practice is to change the forming conditions first. When the problem cannot be solved by changing the forming conditions, the mold repair is considered. We should be more careful when repairing the mold, and do not act rashly without full assurance. The reason is that once the mold conditions have been changed, no major transformation and restoration can be made. Only in this way can the manufacturing quality of the die be improved.